Contact
I want to contact MITSUI CHEMICALS EUROPE GMBH and I agree that my data will be used to process this interest and to contact me and that my data will be stored for the necessary period. I note that further information on the subject of data protection can be found in the gtc / disclaimer privacy policy (click here) and I agree with the findings and regulations made there. I acknowledge that I can revoke this consent at any time and my revocation has legal effect only for the future after the revocation.
* Required

PP-type FOR AUTOMOTIVE

Fuel lines

QB520E: Our standard grade for multilayer fuel lines, certified by the OEMs. ADMER™ QB520E is a maleic anhydride grafted, homo PP-based adhesive.

PP-Grade / MFR: 1.8 / Density: 0.90

Item Value Unit Astm Testing Method
MFR (230°C , 2.16kg)

1.8

 g/10 min D1238
Density 0.90 g/cm3 D1505
Tensile Strength at Yield 21 MPa D638
Tensile Strength at Break 16 MPa D638
Elongation at Break > 500 % D638
Izod Impact Strength 470 J /m² D256
Shore Hardness 64 D scale D2240
Vicat Softening Point 140 °C D1525
Melting Point 161 °C D3418
       

Cooling Pipes for Electric Vehicle (EV)

AT3523E: ADMER™ AT3523E is a maleic anhydride grafted, homo-PP based adhesive resin with a lower MFR for bottles pipes composed of PP with EVOH or PA.  

PP-Grade / MFR: 1.6 / Density: 0.90

Item Value Unit Astm Testing Method
MFR (230°C , 2.16kg)

1.6

 g/10 min D1238
Density 0.90 g/cm3 D1505
Tensile Strength at Yield 24 MPa D638
Tensile Strength at Break 24 MPa D638
Elongation at Break 280 % D638
Izod Impact Strength 470 J /m² D256
Shore Hardness 64 D scale D2240
Vicat Softening Point 140 °C D1525
Melting Point 161 °C D3418