PE-type for Automotive
Plastic Fuel Tanks (PFT) and Filler Pipes
GT6E: Our standard and top-selling PFT grade. ADMER™ GT6E is a maleic anhydride grafted, LLDPE-based adhesive designed for multilayer plastic fuel tanks composed of PE and EVOH.
PE-Grade / MFR: 1.1 / Density: 0.92
| Item | Value | Unit | Astm Testing Method |
| MFR (190°C , 2.16kg) | 1.1 | g/10 min | D1238 |
| Density | 0.92 | g/cm3 | D1505 |
| Tensile Strength at Yield | 11 | MPa | D638 |
| Tensile Strength at Break | 25 | MPa | D638 |
| Elongation at Break | > 500 | % | D638 |
| Izod Impact Strength | No Break | J /m² | D256 |
| Shore Hardness | 51 | D scale | D2240 |
| Vicat Softening Point | 102 | °C | D1525 |
| Melting Point | 122 | °C | D3418 |
Cooling Pipes for Electric Vehicles (EV)
GT7 shows superior adhesion level at 80°C and at room temperature, while retaining excellent impact resistance.
GT7: Next generation grade with improved adhesion performance. ADMER™ GT7 is a maleic anhydride grafted, LLDPE-based adhesive designed for multilayer plastic fuel tanks composed of PE and EVOH. It offers advanced adhesion durability, fuel resistance and processability.
PE-Grade / MFR: 1.0 / Density: 0.93
| Item | Value | Unit | Astm Testing Method |
| MFR (190°C , 2.16kg) | 1.0 | g/10 min | D1238 |
| Density | 0.93 | g/cm3 | D1505 |
| Tensile Strength at Yield | 15 | MPa | D638 |
| Tensile Strength at Break | 29 | MPa | D638 |
| Elongation at Break | > 500 | % | D638 |
| Izod Impact Strength | No Break | J /m² | D256 |
| Shore Hardness | 59 | D scale | D2240 |
| Vicat Softening Point | 108 | °C | D1525 |
| Melting Point | 127 | °C | D3418 |